Program Edit Mode
Selecting Parameters
7-2
To enter Program Edit Mode, rst press the Program Mode button to enter Program Mode,
then press the EDIT soft button.
Once you are in Program Edit Mode, press the soft buttons at the bottom of the screen to
navigate to each of the Program Edit Mode pages. See the following sections for details on
navigating and changing parameters.
All parameters apply only to the currently selected Program.
Selecting Parameters
The Display
In Program Edit Mode, the top line of the display shows the current Mode and Page. Use the
cursor buttons to navigate to dierent rows and columns.
Soft button options for Program Edit mode
Current Page
Current Parameter
Alpha Wheel & Previous (–) and Next (+) Value Buttons
Use the Alpha Wheel or the Value buttons to the right of the display below the Alpha
Wheel, to change the selected parameter value. Turning the Alpha Wheel counter-clockwise
or pressing the Previous button will select the previous value and turning the Alpha Wheel
clockwise or pressing the Next button will select the next value.
To Next Page
Loading...
