Multi Edit Mode
Controls Page
5-34
Controller
Number
Controller
Destination
Description
173 VelPatt
Selects one of the 128 patterns in the current Arpeggiator VelPatt Bank. (See
Velocity Patt on page 3-22)
174 VelPBank
A controller value selects the corresponding Velocity Patt Bank for the Arpeggiator
page of a controller’s zone. For example, controller value 2 selects Velocity Patt
bank 2, controller value 7 selects Velocity Patt bank 7.
175 VelFixed
Set’s arpeggiator velocity when Arpeggiator Velocity Mode is set to Fixed. (See
Velocity on page 3-20)
176 ShKeyNum Shift Key Number (see below)
177 ShiftKey Shift Key (see below)
178 ShKeyNuV
Same as 176 ShKeyNum, but the Shift Pattern’s velocity will be modied by the
current velocity pattern of the zone.
180 Chan Intonation
Selects the Intonation Map (IDs 0-127) in a MIDI channel in real time. On the Multi
Edit Controls page, when setting a switch controller to this Destination the name of
the selected Intonation Map will be displayed. For example: 18 (EastMed).
181 Chan Int Key
Selects the Intonation Key (C through B) in a MIDI channel in real time. On the
Multi Edit Controls page, when setting a switch controller to this Destination the
MIDI number and note name of the selected Intonation Key will be displayed. For
example: 41 (D#).
182 Arp Step
Toggles a selected Arpeggiator pattern step on or off. Assign this destination to a
Switch Controller with Type set to Momentary, On Value set to the desired step
number, and Off Value set to None. The current Zone must have an Arpeggiator set
to Classic Mode using a Shift Pattern, Velocity Pattern, or Duration Pattern, or must
be set to Step Sequencer Mode.
183 CC Seq Step
Toggles a selected CC Sequencer pattern step on or off. Assign this destination to
a Switch Controller with Type set to Momentary, On Value set to the desired step
number, and Off Value set to None. The current Zone must have a CC Sequencer
with at least one Sequence which has the Mode parameter set to User.
To Next Page
Loading...
