Kurzweil SP5-8 - Program Mode - User Program Deletion; Deleting User Programs

Troubleshooting & Maintenance
Software Updates
5-3
Software Updates
1. Go to www.kurzweil.com and follow the links to download the latest software version
to your computer desktop.
Note: The Operating System and Object les are combined in one le type (.KUF).
2. Connect a USB cable from a computer to the USB port on the SP5-8 rear panel.
3. When appears in the display, release the Shift button.
4. You should see in the display.
5. Check the computer desktop and verify that the SP5-8 USB device/window is present.
(This should appear on the desktop as an icon or window.)
6. Press the Param / Chan Down button. The display shows, .
7. Press the Next button. The display shows . Press the Next button again.
8. The display shows the following message:
.
9. Drag and drop the update le(s) directly to the SP5-8 icon on the computer desktop.
Note: Be sure to always read the downloaded release notes and installation instructions in
case they have changed since this manual was written.
10. Press the Next button on the SP5-8 to begin the update. The display shows:
.
11. When the update is complete, the display shows: .
12. Unmount or “safely remove” the SP5-8 icon from your computer.
13. Turn the SP5-8 o, then on again to test the software updates.