KYMCO Mongoose/KXR 250 User Manual

14. FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
14-7
Mongoose/KXR 250
Install the cotter pin and band ends of cotter
pin.
Always use a new cotter pin.
＊
Do not loosen the wheel hub nut after
torque tightening. If the wheel hub nut
groove is not aligned with the cotter pin
hole, align groove with the hole by
tightening up on the wheel hub nut.
Always use a new cotter pin.
＊

KYMCO Mongoose/KXR 250 Specifications

General

Brand	KYMCO
Model	Mongoose/KXR 250
Category	Offroad Vehicle
Language	English