15. REAR WHEEL/AXLE/SUSPENSION
15-11
Mongoose/KXR 250
Install the rear wheel and tighten the four
nuts.
Torque: 4.0～5.0kgf-m
Tighten the two rear axle nuts (inner and
outer).
Nut wrench F010
Torque: 11.0～13.0kgf-m
Adjust drive chain slack. (Refer to the
“DRIVE CHAIN SLACK ADJUSTMENT”
section in the CHAPTER 3.)
Drive chain slack: 30 ~ 40mm
Be sure the tapered side of the wheel nuts
face the wheel rim.
＊
Special
Note that the rear axle nuts are left
threaded.
＊
To Next Page
Loading...
