KYMCO Mongoose/KXR 250 User Manual

19. BULBS REMOVAL/INSTRUMENT/HORN
19-1
Mongoose/KXR 250
BULBS REMOVAL
HEADLIGHT
Remove the front fender. (See page 2-5)
Disconnect the headlight wire coupler.
Remove the rubber boot from the bulb
socket.
Relax the lock clip to remove the bulb and
replace with a new one.
Install the bulb, aligning the bulb socket
groove with the bulb tab and set the lock
clip.
Install the rubber boot.
Install the front fender in the reverse order
of removal.
TAIL/BRAKE LIGHT
Remove the bulb socket by turning it
counterclockwise.
Remove the bulb.
Install the bulb in the reverse order of
removal.
Headlight Wire Coupler
Bulb Socket
Bulb
Rubber Boot
Lock Clip
Bulb

KYMCO Mongoose/KXR 250 Specifications

General

Brand	KYMCO
Model	Mongoose/KXR 250
Category	Offroad Vehicle
Language	English