KYMCO Mongoose/KXR 250 User Manual

19. BULBS REMOVAL/INSTRUMENT/HORN
19-2
Mongoose/KXR 250
INDICATOR LIGHT
Remove the handlebar cover. (See page 2-4)
Remove the bulb sockets by pulling them
out.
Remove the bulb.
Install the bulb in the reverse order of
removal.
POSITION LIGHT (ON ROAD ONLY)
Remove the handlebar cover. (See page 2-4)
Remove the bulb socket by pulling it out.
Remove the bulb.
Install the bulb in the reverse order of
removal.
FRONT TURN SIGNAL LIGHT (ON
ROAD ONLY)
Remove the turn signal light lens by a
standard screwdriver.
Pull the bulb socket out from the signal light
case and remove bulb.
Install the bulb, aligning the bulb socket
groove with the bulb tab.
Bulb Socket
Turn Signal Light Lens
Bulb
Bulb
Bulb Socket
Bulb
Bulb Socket

KYMCO Mongoose/KXR 250 Specifications

General

Brand	KYMCO
Model	Mongoose/KXR 250
Category	Offroad Vehicle
Language	English