How to fix improperly printed documents on Kyocera ECOSYS FS-1035MFP/DP Printer?
If documents are printed improperly by your Kyocera Printer, check that the printing system driver and application software settings are set properly on your PC.
How to fix Kyocera ECOSYS FS-1035MFP/DP Printer cannot feed originals?
If your Kyocera Printer cannot feed originals, when placing originals in the document processor, align the original width guides securely before placing the originals.
Why does my Kyocera Printer paper often jam?
Paper jams in your Kyocera Printer can occur due to several reasons. Ensure the paper is loaded correctly. If it is a supported type and in good condition, try removing it, turning it over, and reloading it. Replace any curled, folded, or wrinkled paper with new paper. Also, check for and remove any loose scraps or jammed paper inside the machine.
How to remove moire pattern from Kyocera ECOSYS FS-1035MFP/DP copies?
If copies from your Kyocera Printer have a moire pattern, and the original is a printed photograph, set the image quality to [Photo].
What to do if pressing Start key on Kyocera Printer does not produce copies?
If pressing the Start key on your Kyocera Printer does not produce copies, check the Message Display for any messages and respond accordingly. Also, check if the machine is in Sleep mode; if so, press any key on the operation panel to recover the machine. It will be ready to copy within 15 seconds.
Why are Kyocera Printer printouts wrinkled?
If the printouts from your Kyocera Printer are wrinkled or curled, the paper might be damp. Replace the paper with new paper.
Why are images skewed on my Kyocera ECOSYS FS-1035MFP/DP Printer?
If images are skewed when using your Kyocera Printer, check that the originals are placed correctly. When using the platen, align them with the slit glass. When using the document processor, align the original width guides securely before placing the originals. Also, ensure the paper is loaded correctly by checking the position of the paper width guides.
How to fix Kyocera ECOSYS FS-1035MFP/DP Printer operation panel not responding?
If the operation panel of your Kyocera Printer does not respond when the power switch is turned on, ensure that the power cord is plugged into an AC outlet.
How to adjust darkness on Kyocera Printer printouts?
If the printouts from your Kyocera Printer are too dark, check if the machine is in Auto Density mode and set the correct density level. Also, verify if the machine is in Manual Density mode and select the correct density level.
How to fix light printouts on Kyocera ECOSYS FS-1035MFP/DP?
If the printouts from your Kyocera Printer are too light, verify that the machine is not in Manual Density mode and select the correct density level if needed. Shake the toner container from side to side to evenly distribute the toner. If there's a message indicating the need for more toner, replace the toner container. Ensure the paper isn't damp and replace it if it is. Disable EcoPrint mode if it's enabled. Also, make sure the paper type setting matches the paper being used.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 1200 dpi |
| Paper Output Capacity | 150 sheets |
| Scanner Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Windows, macOS, Linux |
| Memory | 512 MB |
| Type | Monochrome |
| Print Speed | 35 ppm |
| Paper Capacity | 250 sheets |
| Duplex Printing | Yes |
| Scanner Type | Flatbed and ADF |
| Copy Speed | 35 cpm |
| Scan Speed (Black & White) | Up to 35 ipm (A4, 300 dpi) |
Instructions for connecting cables to the machine and power outlet.
Steps to turn the machine on and off safely.
Step-by-step guide for performing basic copying operations.
General guidelines and corrective actions for common machine problems.
Instructions for clearing paper jams in various locations of the machine.
How to respond to alphanumeric error messages displayed on the control panel.
To Next Page
