Kyocera FS-1028MFP - Paper Selection

2H9
1-5-14
(2) Detaching and refitting the scanner unit (LSU)
Procedure
1. Remove the original cover (See page 1-5-
13).
2. Remove the left cover and right cover (See
page 1-5-3).
3. Remove the FFC and connector from the
control PWB.
4. Remove three connectors from the scanner
PWB.
Figure 1-5-17
Connector
FFC
Scanner PWB
Scanner PWB
Connector
Connector
Connector
YC8
YC7
YC108YC104
YC105
Control PWB
Control PWB