Kyocera FS-1028MFP - Copying

2H9-1
1-4-3
(2) Self diagnostic codes
Code Contents
Remarks
Causes Check procedures/corrective measures
0100 Backup memory device error Defective flash
memory.
Replace the control PWB (See page 1-5-
39).
Defective control
PWB.
Replace the control PWB (See page 1-5-
39).
0120 MAC address data error Defective flash
memory.
Replace the control PWB (See page 1-5-
39).
0130 Backup memory read/write error Defective flash
memory.
Replace the control PWB (See page 1-5-
39).
Defective control
PWB.
Replace the control PWB (See page 1-5-
39).
0140 Backup memory data error Defective flash
memory.
Replace the control PWB (See page 1-5-
39).
Defective control
PWB.
Replace the control PWB (See page 1-5-
39).
0150 Control PWB EEPROM error
Detecting control PWB EEPROM (U17)
communication error.
Improper installa-
tion control PWB
EEPROM (U17).
Check the installation of the EEPROM (U17)
and remedy if necessary (See page 1-5-39).
Defective control
PWB.
Replace the control PWB (See page 1-5-
39).
Data damage of
control PWB
EEPROM (U17).
Contact the Service Administrative Division.
0170 Billing counting error Defective control
PWB.
Replace the control PWB (See page 1-5-
39).
Data damage of
control PWB
EEPROM (U17).
Contact the Service Administrative Division.
0180 Machine number mismatch
Machine number of main and engine
does not match.
Data damage of
control PWB
EEPROM (U17).
Contact the Service Administrative Division.