EasyManuals Logo

Kyocera FS-1028MFP Service Manual

Kyocera FS-1028MFP
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1.Installation Precautions
WARNING
Do not use a power supply with a voltage other than that specified. Avoid multiple connections to
one outlet: they may cause fire or electric shock. When using an extension cable, always check
that it is adequate for the rated current. .............................................................................................
Connect the ground wire to a suitable grounding point. Not grounding the copier may cause fire or
electric shock. Connecting the earth wire to an object not approved for the purpose may cause
explosion or electric shock. Never connect the ground cable to any of the following: gas pipes,
lightning rods, ground cables for telephone lines and water pipes or faucets not approved by the
proper authorities. ............................................................................................................................
CAUTION:
Do not place the copier on an infirm or angled surface: the copier may tip over, causing injury. .......
Do not install the copier in a humid or dusty place. This may cause fire or electric shock. ................
Do not install the copier near a radiator, heater, other heat source or near flammable material.
This may cause fire. .........................................................................................................................
Allow sufficient space around the copier to allow the ventilation grills to keep the machine as cool
as possible. Insufficient ventilation may cause heat buildup and poor copying performance. ...........
Always handle the machine by the correct locations when moving it. ...............................................
Always use anti-toppling and locking devices on copiers so equipped. Failure to do this may cause
the copier to move unexpectedly or topple, leading to injury. ...........................................................
Avoid inhaling toner or developer excessively. Protect the eyes. If toner or developer is acciden-
tally ingested, drink a lot of water to dilute it in the stomach and obtain medical attention immedi-
ately. If it gets into the eyes, rinse immediately with copious amounts of water and obtain medical
attention. ......................................................................................................................................
Advice customers that they must always follow the safety warnings and precautions in the copier’s
instruction handbook. .....................................................................................................................

Table of Contents

Other manuals for Kyocera FS-1028MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-1028MFP and is the answer not in the manual?

Kyocera FS-1028MFP Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)6 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Grayscale levels256
Maximum copy resolution600 x 600 DPI
Time to first copy (black, normal)6.9 s
Internal memory256 MB
Dimensions (WxDxH)494 x 410 x 366 mm
Power requirements220 - 240
All-in-one functionsCopy, Scan
Maximum internal memory0.768 GB
Compatible operating systemsWindows 2000/XP/Server2003/Vista/7/Server2008
Duty cycle letter size (maximum)2800 pages per month
Standard interfacesUSB 2.0
Power consumption (standby)88 W
Power consumption (average operating)494 W
Non-ISO print media sizesFolio
Maximum duty cycle20000 pages per month
Market positioningBusiness

Related product manuals