Kyocera FS-1028MFP

2H9
1-5-45
(3) Detaching and refitting the high voltage PWB
Procedure
1. Remove the developing unit (See page 1-5-
29).
2. Remove the drum unit (See page 1-5-30).
3. Remove the cassette (See page 1-5-6).
4. Remove the left cover and right cover (See
page 1-5-3).
5. Remove the power source PWB (See page
1-5-42).
6. Turn the printer with the front side up.
7. Remove the stopper.
8. Remove the DU holder.
Figure 1-5-68
9. Pull the DU bush out.
10. Remove the DU cover assembly.
Figure 1-5-69
DU holder
Stoppe
r
DU bush
DU cover
assembly