Kyocera FS-1028MFP

2H9
1-5-31
(2) Detaching and refitting the main charger unit
Procedure
1. Remove the developing unit (See page 1-5-
29).
2. Remove the drum unit (See page 1-5-30).
3. Remove the tape.
4. While pushing on the main plate , slide
the main charger unit .
Figure 1-5-46
5. Remove the main charger unit by lifting it.
6. Check or replace the main charger unit and
refit all the removed parts.
Figure 1-5-47
Main charger unit
Main charger unit
Tap e
Main plate
Drum unit


Main charger unit