Kyocera FS-1028MFP

2H9
1-5-17
(3) Detaching and refitting the laser scanner unit (LSU)
Procedure
1. Remove the scanner unit (See page 1-5-
14).
2. Remove the screw and then remove the
grounding terminal.
3. Remove two connectors from the control
PWB.
Figure 1-5-21
Control PWB
Connector
Connector
YC3
YC10
Screw
Grounding
terminal
Connector
(YC10)
Connector
(YC3)
Control PWB