Kyocera FS-1028MFP - Page 130

2H9-1
1-5-22
6. Move the image scanner unit (ISU) in the
middle of the ISU shaft.
7. Detach the ISU shaft from the holder by lift-
ing it.
8. Pull the ISU shaft out from the ISU.
Figure 1-5-30
9. Remove the ISU belt from the tension pulley
and ISU gear 63/32.
10. Remove the ISU belt from the hooks of the
ISU.
Figure 1-5-31
ISU shaft
ISU shaft
ISU shaft
Holder
Image
scanner
unit (ISU)
ISU gear 63/32
Tension pulley
Image
scanner
unit (ISU)
ISU shaft
ISU belt
ISU belt
ISU belt
Hook
Hook