2H9-1
1-3-6
U000
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U001
Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
U002
Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport (position in which the frame can be fixed).
Method
1. Press the start key.
2. Select [MODE1(ALL)] using the cursor up/down keys.
3. Press the start key.
The mirror frame of the scanner returns to the position for transport.
4. Turn the main power switch off and on.
An error code is displayed in case of an initialization error. Refer to the table of the error codes on P.1-3-8.
When errors occurred, turn main power switch off then on, and execute initialization using maintenance
item U002.
Maintenance
item No.
Description
No. Items Description
(7) Counter Log
Comprised of three
log counters includ-
ing paper jams, self
diagnostics errors,
and replacement of
the toner container.
(f) Paper jam (g) Self diagnostic error (h) Maintenance item
replacing
Indicates the log
counter of paper jams
depending on location.
Refer to Paper Jam
Log.
All instances including
those are not occurred
are displayed.
Indicates the log
counter of self diagnos-
tics errors depending
on cause. (See page 1-
4-3)
Example:
C6000: 4
Self diagnostics error
6000 has happened
four times.
Indicates the log
counter depending on
the maintenance item
for maintenance.
T: Toner container
00: Black
M: Maintenance kit
00: MK-130/MK-132
Example:
T00: 1
The toner container has
been replaced once.
To Next Page
Loading...
