Kyocera FS-2100DN User Manual

4-95
Operation Panel
6 Press [OK]. The Login Password entry screen is displayed.
7 Enter the Login Password using the numeric keys then press [OK].
The login screen reappears.
8 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the TonerAlert Level menu
screen appears.
9 Press U or V to select Off/On.
10 Press [OK]. The Off/On screen appears.
11 Press U or V to select whether Toner Alert Level is enabled.
12 Press [OK]. The TonerAlert Level screen appears.
13 Press U or V to select TonerAlert Level.
14 Press [OK]. The TonerAlert Level screen appears.
15 Use the numeric keys or press U or V to set the level at which an
alert will be displayed. The setting is possible between 5 and 100%.
16 Press [OK]. The Toner Alert Level is set and the TonerAlert
Level menu reappears.
Note The initial setting for the administrator's Login
Password is "Admin".
For details on entering characters, refer to Character Entry
Method on page A-2.
Login Password: a b
*
ABC
[ Text ]
Login User Name: O b
Admin
Login Password:
/******************-
[ Login ]
●●●●●
TonerAlert Level: a b
********************-
2 TonerAlert Level
[ Exit ]
1 Off/On
Off/On: a b
********************-
2 On
1 *Off
TonerAlert Level: a b
********************-
2 TonerAlert Level
[ Exit ]
1 Off/On
TonerAlert Level: a b
(5 - 100)
/*5- %

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s