Kyocera FS-2100DN User Manual

4-7
Operation Panel
Using the Menu Selection System
Menu Selection System
This section explains how to use the menu selection system.
[Menu] on the operation panel allows you to use the menu to configure the printer settings to your specific needs. Settings
can be made when Ready to print., Please wait. or Processing. is indicated on the printer message display.
Entering the Mode Selection Menu
Press [Menu] when Ready to print. is indicated on the printer message display.
The mode selection menu is displayed.
Note Settings that are received from application software and the printer driver will take priority over settings made
in the operation panel.
Note Only when USB memory is installed, USB Memory is displayed.
Network is only displayed on network compatible models.
Menu: a b
********************-
2 USB Memory
3 Counter
[ Exit ]
1 Report Print
Menu: a b
********************-
5 Print Settings
6 Network
[ Exit ]
4 Paper Settings
Paper Settings: a b
1 MP Tray Set.
********************-
3 Media Type Set.
[ Exit ]
2 Cassette 1 Set.
Media Type: a b
********************-
2 Preprinted
3 Bond
1 *Plain
Scroll page
Scroll line
Ready to print.
UW LT VX A4
[ Status ] [ Toner ]
The directions of usable
arrow keys are shown on
the screen displayed.
An asterisk (*) is displayed
to the left of the currently
selected setting.

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s