Kyocera FS-2100DN User Manual

Preparation before Use
2-20
Power On/Off
Power On
1 Press the Power switch.
IMPORTANT When turning off the power switch, do not turn on the
power switch again immediately. Wait more than 5 seconds, and then
turn on the power switch.
Power Off
1 Make sure that the Data indicator is off, then press the Power switch.
ON
ON
OFF
OFF
Make sure that the Data
indicator is off.

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s