4-23
Operation Panel
XPS FitTo Page (Adjusting the XPS file print out size)
Select On in this setting to enlarge or reduce XPS files to fit the printable area during printing.
1 In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
2 Press U or V to select XPS FitTo Page.
3 Press [OK]. The XPS FitTo Page screen appears.
4 Press U or V to select whether XPS FitTo Page mode is enabled.
5 Press [OK]. The XPS FitTo Page setting is set and the Function
menu reappears.
Detail (Shows the details of the selected file)
Use this to view detailed information on the files and folders in the USB memory.
1 Use the procedure described in Print File (Printing and checking the
files in the USB memory) on page 4-17 to display a list of the files or
folders you want to check.
2 Press U or V to select the folder or file you want to check.
3 Press [Detail] ([Right Select]). The Detail screen appears.
If you selected a file, there are 4 Detail screens. Press Y or Z to
move between the screens.
If you selected a folder, there are 2 Detail screens. Press Y or Z to
move between the screens.
Pressing [OK] while file or folder details are displayed returns you to
the Print File menu.
If the entire name shown as the File Name or Folder Name will
not fit on one line, pressing [Detail] ([Right Select]) changes to a
3-line name display. If the name is 3 or more lines long, you can scroll
up or down by pressing U or V.
To Next Page
Loading...
Need help?
General
