2DC
1-6-16
10. Remove the main board (See page 1-6-10).
11. Remove one screw and then remove the grounding plate.
12. Remove one screw and then remove the feed clutch.
13. Remove three stop rings.
14. Remove MP feed clutch (gear), feed clutch (gear), and registration clutch (gear).
Figure 1-6-18 Removing the clutches
Stop ring
Stop ring
Stop ring
MP feed clutch (gear)
Feed clutch (gear)
Feed clutch
Registration clutch (gear)
Screw
Screw
Grounding
plate
To Next Page
Loading...
