2DC
1-6-34
1-6-13 Removing the exposure lamp
1. Remove the ISU unit (See page 1-6-32).
2. Remove the two connectors from the inverter
board.
3. Remove the one screw and then remove the
inverter board.
Screw
Connectors
Inverter board
ISU unit
ISU unit
Exposure lamp mount
Hook
Figure 1-6-39 Removing the inverter board
4. While unhooking the hook and then slide the
exposure lamp mount.
Figure 1-6-40 Removing the exposure lamp mount
To Next Page
Loading...
