2DC-2
1-4-21
Maintenance
Description
item No.
U244 Checking the DP switches
Description
Displays the status of the switches in the DP.
Purpose
To check if switches in the DP operate correctly.
Method
1. Press the start key. "-S-" appears.
2. Manually turn on and off each switch to check the status. When the on-status of a switch is detected, the
image mode LED corresponding to the operated switch lights.
Image mode LEDs Description
DP original detection switch
DP timing switch
DP open/close switch
DP original cover switch
: Off, : On
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U252 Setting the destination
Description
Switches the operations and screens of the machine according to the destination.
Purpose
To return the destination setting to its default setting after initializing the backup RAM by running maintenance
item U020.
Method
Press the start key.
Setting
1. Select the destination using the zoom +/– keys.
Display Description
Inc Inch (North America) specifications
EUP Metric (Europe) specifications
ASA Metric (Asia Pacific) specifications
2. Press the start key. The setting is set, and the machine automatically returns to the same status as when
the power is turned on.
Completion
To exit this maintenance item without changing the current count, press the stop/clear key. The indication for
selecting a maintenance item No. appears.
To Next Page
Loading...
