2DC
1-4-27
Maintenance
Description
item No.
U905 Checking/clearing counts by the DP
Description
Displays or clears the counts of the DP.
Purpose
To check the use of the DP. Also to clear the counts after replacing consumable parts.
Method
1. Press the start key.
2. Change the indication of the copy quantity display by lighting a copy exposure indicator using the copy
exposure adjustment keys.
Copy exposure indicator Copy quantity display (count value)
Exp. 1 First 3 digits of the number of original replacement
Exp. 2 Last 3 digits of the number of original replacement
Exp. 3 Clearing the count (CLE)
Clearing
1. Light exp. 3 using the copy exposure adjustment keys.
2. Press the start key. The count is cleared.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U908 Checking the total count
Description
Display the total count value.
Purpose
To check the total count value.
Method
1. Press the start key.
2. Change the indication of the copy quantity display by lighting a copy exposure indicator using the copy
exposure adjustment keys.
Copy exposure indicator Copy quantity display (count value)
Exp. 1 First 3 digits of the total count
Exp. 2 Last 3 digits of the total count
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U910 Clearing the black ratio data
Description
Clears the accumulated black ratio data for A4/11" × 8
1
/
2
" sheets.
Purpose
To clear data as required at times such as during maintenance service.
Method
1. Press the start key.
2. Select “on” using the zoom +/– keys.
Display Operation
––– Canceling the clearing
on Executing the clearing
3. Press the start key. The accumulated black ratio data is cleared.
Completion
To exit this maintenance item without clearing the data, press the stop/clear key. The indication for selecting a
maintenance item No. appears.
To Next Page
Loading...
