1-4-32
2DC-2
(2) Default settings
User status report
Outputs the details of the default settings.
1. Select “F01” and press the Recall%/Enter key.
User status report is printed out.
Exposure mode
Selects the image mode at power-on.
1. Select “F02” and press the Recall%/Enter key.
2. Select the exposure mode and press the Recall%/
Enter key.
Exposure mode: 1 (auto exposure)/
2 (text and photo)/3 (photo)/4 (text)/5 (eco-print)
Exposure steps
Sets the number of exposure steps for the manual
exposure mode.
1. Select “F03” and press the Recall%/Enter key.
2. Select “5 steps” or “7 steps” and press the
Recall%/Enter key.
Setting range: 1 (5 steps)/2 (7 steps)
Auto exposure adjustment
Adjusts the exposure for the auto exposure mode.
1. Select “F04” and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1 to 5
Text and photo original exposure adjustment
Adjusts the exposure to be used when text and photo
original is selected for the image mode.
1. Select “F05” and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1 to 5
Photo original exposure adjustment
Adjusts the exposure to be used when photo original
is selected for the image mode.
1. Select “F06” and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1 to 5
Text original exposure adjustment
Adjusts the exposure to be used when text original is
selected for the image mode.
1. Select “F07” and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1 to 5
Black line correction
Makes black lines less apparent when feeding
originals from the optional DP.
1. Select “F08” and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1 (off)/2 (weak)/3 (strong)
Note: This setting item will not be available when
the photo mode is selected as the image quality
mode.
Photo processing
Copies will come out clearer if selecting “Error
diffusion” when using originals with both text and
photos and “Dithering” when using originals with
mainly photos.
1. Select “F09” and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1 (Error diffusion)/2 (Dithering)
Default drawer
Sets the drawer to be selected in case such as after
the stop/reset key is pressed.
1. Select “F10” and press the Recall%/Enter key.
2. Select default drawer and Recall%/Enter key: on
Default drawer: 1 (drawer)/2 (optional drawer)
Note: This setting item will not be displayed if the
optional drawer is not installed.
Automatic drawer switching
Sets if the automatic drawer switching function is
available.
1. Select “F11” and press the Recall%/Enter key.
2. Select “on” or “off” and press the Recall%/Enter
key.
Note: This setting item will not be displayed if the
optional drawer is not installed.
Drawer paper size
Sets the size of paper loaded in the drawer.
1. Select “F12” and press the Recall%/Enter key.
2. Select the size of paper and press the Recall%/
Enter key.
Paper size: -A4 (A4)/-A5 (A5)/-Fo (Folio)/
-Lg (8
1
/
2
" × 14")/-Lt (8
1
/
2
" × 11")/-o2 (8
1
/
2
" × 13")
To Next Page
Loading...
