Kyocera KM-1500 - Page 85

2DC
1-5-19
(15)Fixing is poor. Causes
1. Wrong paper.
2. Flawed press roller.
Causes Check procedures/corrective measures
1. Wrong paper. Check if the paper meets specifications.
2. Flawed press roller. Replace the press roller (see page 1-6-26).
Causes Check procedures/corrective measures
1. Misadjusted center line of image printing. Readjust the center line of image printing (see pages 1-6-42).
2. Misadjusted scanner center line. Readjust the scanner center line (see page 1-6-48).
3. Original placed incorrectly. Place the original correctly.
(16)Image center does not
align with the original
center.
Causes
1. Misadjusted center line of image printing.
2. Misadjusted scanner center line.
3. Original placed incorrectly.