2DA/2DB
1-5-6
DP 70
No original feed*
1
During the primary feed of the second original in the single-
sided or double-sided original mode, even if retry operation is
performed five times, primary original feed is not performed.
71 An original jam in the orig-
inal conveying section 1*
1
During the secondary original feed in the single-sided or dou-
ble-sided original mode, the DP timing switch (DPTSW)*
1
does not turn off within 6500 ms of the original conveying
motor (OCM)*
1
turning on.
72 An original size error
jam*
1
During the secondary original feed in the single-sided or dou-
ble-sided original mode, the DP timing switch (DPTSW)*
1
does turn off within 750 ms of the original conveying motor
(OCM)*
1
turning on.
73 An original jam in the orig-
inal conveying section 2*
1
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
switch (DPTSW)*
1
does not turn off within 6500 ms of the orig-
inal conveying motor (OCM)*
1
turning on.
74 An original jam in the orig-
inal conveying section 3*
1
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
switch (DPTSW)*
1
does not turn on within 750 ms of the origi-
nal conveying motor (OCM)*
1
turning on.
75 An original jam in the orig-
inal switchback section*
1
During the switchback operation of an original in the double-
sided original mode, the original switchback switch
(OSBSW)*
1
does not turn on within 1300 ms of the original
conveying motor (OCM)*
1
turning on.
Finisher 80 Jam between the finisher
and MFP*
1
The paper conveying switch (PCSW)*
1
does not turn on within
1550 ms of the signal requesting paper ejection is output from
the MFP.
81
Intake jam*
1
During paper intake from the MFP, the paper conveying switch
(PCSW)*
1
does not turn off within 1960 to 3480 ms (depend-
ing on paper size) of paper conveying switch (PCSW)*
1
turn-
ing on.
83 Jam during paper convey-
ing for batch ejection 1*
1
When ejection a stack of paper, the paper conveying switch
(PCSW)*
1
does not turn on within 1590 ms of the paper con-
veying motor (PCM)*
1
turning on.
84 Jam during paper convey-
ing for batch ejection 2*
1
When ejection a stack of paper, the paper conveying switch
(PCSW)*
1
does not turn off within 2260 to 3190 ms (varies
depending on the paper size) of the paper conveying motor
(PCM)*
1
turning on.
*1: Optional. *2: Optional for 16 ppm model. Standard for 20 ppm model.
Section Jam code Description Conditions
To Next Page
Loading...
