2DA/2DB-3.0
1-3-6
1. Load paper in the drawer.
1. Enter "000" using the numeric keys and
press the start key.
2. Select "MAINTENANCE" and press the start
key to output a list of the current settings of
the maintenance items.
3. Press the stop/clear key.
1. Enter "001" using the numeric keys and press the start key.
The machine exits the maintenance mode.
1. Place an original and make test copies.
1-3-2 Setting initial copy modes
Factory settings are as follows:
Maintenance
item No.
Contents Factory setting
U253 Switching between double and single counts Double count
U254 Turning auto start function on/off ON
U258 Switching copy operation at toner empty detection SINGLE MODE
U260 Changing the copy count timing After ejection
U264 Setting the display order of the date Month/Day/Year (Inch specifications)
Day/Month/Year (Metric specifications)
U277 Setting auto aplication change time 30
U326 Setting the black line cleaning indication ON
U342 Setting the ejection restriction ON
U343 Switching between duplex/simplex copy mode OFF
U344 Setting preheat/energy saver mode ENERGY STAR
Load paper.
Output an own-status report (maintenance item U000).
Exit maintenance mode.
Make test copies.
End of installation.
To Next Page
Loading...
