2DA/2DB
1-3-41
Attach the cover plate.
27. Incurvate the cover plate a little and then
insert the upper and lower projections to the
fitting parts of the operation section to
attach.
28. Check that the cover plate smoothly moves
on either side.
Figure 1-3-82
Attach the one-touch sheet.
29. Divide the one-touch sheet of the corre-
sponding language into two parts and then
mount them on the one-touch securing
sheet each.
Bring back the left cover of the operation
section that has been removed by Proce-
dure 19, operation section sheet that has
been removed by Procedure 21, operation
section sheet for fax that corresponds to the
unused languages, and the one-touch
sheet.
Figure 1-3-83
Cover plate
Projection
Projection
One-touch sheet
To Next Page
Loading...
