2C9
1-6-13
(7-2) Adjusting the leading edge registration for memory image printing
Make the following adjustment if there is a regular error between the leading edge of the copy image and the leading
edge of the original during memory copying.
U053
(P. 1-4-10)
U066
(P. 1-6-30)
U065
(P. 1-6-29)
U403
(P. 1-6-32)
U407
U034
(P. 1-6-12)
Caution:
Before making the following adjustment, ensure the above adjustments have been made in maintenance mode.
Procedure
Original Copy
example 1
Copy
example 2
Figure 1-6-25
Yes
No
Start
Enter maintenance mode.
Enter “407” using the numeric keys.
Press the start key.
Press the interrupt key.
Press the start key
and make a test copy.
Is the leading edge
registration correct?
Press the start key.
The new setting is stored.
Setting range: –10 – +10
Initilal setting: 0
Changing the value by 1 moves
the leading edge by 1 mm.
Press the stop/clear key to
exit maintenance mode.
End
For copy example 1, increase the
value using the zoom (+) key.
For copy example 2, decrease the
value using the zoom (–) key.
To Next Page
Loading...
