2C9
1-6-35
(3) Detaching and refitting the main charger unit
Follow the procedure below to replace the main charger unit.
Procedure
1. Open the front cover.
2. While lifting the main charger unit toward the
upper right, remove the unit from the copier.
3. While pressing the main charger release
lever in the direction indicated by the arrow at
the removal stopper position to release the
removal stopper, remove the main charger
unit from the copier.
4. Replace the main charger unit and refit all the
removed parts.
Main charger unit
Main charger
release lever
Figure 1-6-64
To Next Page
Loading...
