Kyocera KM-2020

2C9
1-4-45
1-4-2 Copier management
In addition to a maintenance function for service, the copier is equipped with a management function which can be operated
by users (mainly by the copier administrator). In this copier management mode, settings such as default settings can be
changed.
(1) Using the copier management mode
• Executing a department management item • Executing a default setting item
Press both of the copy
exposure adjustment keys
and manegement key for 3 s.
Select an item using the zoom
+/– keys or numeric keys.
Press the enter key.
Execute the department
management item
(page 1-4-46).
Select “d00” and
press the enter key.
Start
Press both of the copy expo-
sure adjustment keys for 3 s.
Select an item using the zoom
+/– keys or numeric keys.
Press the enter key.
Execute the default
setting item (page 1-4-46).
Select “F00” and
press the enter key.
Start
End