Kyocera KM-2020

2C9
1-4-39
Maintenance
Description
item No.
U905 Checking/clearing counts by the DP
Description
Displays or clears the counts of the DP.
Purpose
To check the use of the DP. Also to clear the counts after replacing consumable parts.
Method
1. Press the start key.
2. Select the count (group No.) to be checked or cleared by lighting image mode LEDs using the image mode
selection key.
3. Select the item by lighting a copy exposure indicator using the copy exposure adjustment keys.
Image mode LED Copy exposure
Copy quantity display (count value)
(group No.) indicator
1 Exp. 1 First 3 digits of the number of original
replacement
Exp. 2 Last 3 digits of the number of original
replacement
Exp. 3 Clearing the count (CLE)
2 Exp. 1 First 3 digits of the double-sided original feed
count
Exp. 2 Last 3 digits of the double-sided original feed
count
Exp. 3 Clearing the count (CLE)
: Off, : On
Clearing
1. Select the count to be cleared.
2. Light exp. 3 using the copy exposure adjustment keys.
3. Press the start key. The count is cleared.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.