Kyocera KM-2020

2C9
1-4-48
Custom 2 size
Sets the size of the paper to be set to the custom 2
size.
1. Select “F23” and press the enter key.
2. Select the paper size and press the enter key.
Setting range: b6r (B6)/A6r (A6)/Pos
(postcard)/Ldr (ledger/11" × 17")/Lgr (legal/
8
1
/
2
" × 14")/Ltr (letter/8
1
/
2
" × 11")/LtE (letter
vertical/11" × 8
1
/
2
")/Str (statement)/o2r
(oficio2)/CPF (11" × 15")/InP (irregular size)
Copy limit
Sets the number of copies limit for multiple copy-
ing.
1. Select “F24” and press the enter key.
2. Enter the setting and press the enter key.
Setting range: 1 to 250 copies
Duplex copy reverse-side rotation setting
Select whether or not the image on the reverse side
is rotated 180 degrees in the duplex copy mode.
1. Select “F25” and press the enter key.
2. Select “ON” or “OFF” and press the enter key.
Setting range: ON (rotate)/OFF (no rotation)
Margin width
Sets the default setting of the margin width for the
margin copying.
1. Select “F26” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 18 mm
Border erase width
Sets the default setting of the border erase width
for the border erase mode.
1. Select “F27” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 6 mm/12 mm/18 mm
4 in 1 layout setting
Sets the layoout for the order in which the originals
will appear in the 4 in 1 layout mode.
1. Select “F28” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 4
Aggregate copy borderline
Selects the type of borderline to be usedf in the
layout mode.
1. Select “F29” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (no borderline)/2 (solid line)/
3 (dotted line)
Rotate sort
Sets whether or not to perform rotate sorting when
the sort mode is selected.
1. Select “F30” and press the enter key.
2. Select “ON” or “OFF” and press the enter key.
Setting range: ON (enabled)/OFF (disabled)
Silent mode transition time
Set the silent mode transition time after copying.
1. Select “F31” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 0 sec/5 sec/10 sec/
15 sec/30 sec
Auto clear setting
Sets whether the auto clear function is available.
1. Select “F32” and press the enter key.
2. Select “ON” or “OFF” and press the enter key.
Setting range: ON (enabled)/OFF (disabled)
Auto off setting
Sets whether the auto off function is available.
1. Select “F33” and press the enter key.
2. Select “ON” or “OFF” and press the enter key.
Setting range: ON (enabled)/OFF (disabled)
Auto clear time
Sets the auto clear time.
1. Select “F34” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 10 to 270 sec
Auto preheat time
Sets the auto preheat time.
1. Select “F35” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 min/5 min/15 min/30 min/45
min/60 min/90 min/120 min/180 min/240 min
Auto shutoff time
Sets the auto shutoff time.
1. Select “F36” and press the enter key.
2. Select the setting and press the enter key.
Setting range: 15 min/30 min/45 min/60 min/
90 min/120 min/180 min/240 min
Alarm
The alarm can be set to sound when errors occur.
1. Select “F37” and press the enter key.
2. Select “ON” or “OFF” and press the enter key.
Setting range: ON (sound alarm)/
OFF (no alarm)
Toner coverage report
Prints out a report that shows the number of copies
made and the blackness ratio for each paper size.
1. Select “F38” and press the enter key.
If A4/11" × 8
1
/
2
" paper is present, the list is
automatically printed out. Otherwise, select
the paper source and press the start key.