Advanced
10-5 KX Driver
Additional Text Options
Fonts
Select a font for the new watermark from the Font list, and select a font style, color,
and size.
In the Count box, enter the number of watermarks to appear on a page, from 1 to
20. Selecting a number greater than 1 in Count enables the Spacing option. Enter
a number for the distance between multiple watermarks, in tenths of an inch or
millimeters. The unit (inches or millimeters) is selected in the User Settings dialog
box, accessed from the Device Settings tab.
Use the preview area and the Position or Angle features to adjust where the
watermark prints on the page.
Position
Click the position button to change the position of the watermark without changing
the angle. Position the cursor anywhere in the preview area. Click and hold as you
move the mouse, adjusting the watermark image as you want it to appear on the
printed page.
The following options provide additional means for positioning watermark text:
Centered [default]: Places the center of the watermark text in the center of the
page.
User defined: Select, and then use the x and y boxes to move the text from the
center of the page:
• A positive x value moves the watermark text to the right.
• A negative x value moves the watermark text to the left.
• A positive y value moves the watermark text down.
• A negative y value moves the watermark text up.
To Next Page
Loading...
