User Guide 5-1
5 Finishing
This chapter describes the use of finishing equipment. The Finishing tab is available
for models that support optional finishing devices such as Multi finisher or Booklet
stitcher.
Note: For some features in the Finishing tab, the symbol is displayed when the
feature is unavailable. Place the pointer over the symbol for a message that tells how
to activate the feature in the driver.
• Staple binds multiple document pages together with one or more staples.
• Punch places round hole punches in the margin.
• Separation physically separates document copies or multiple copies of a print
job in the finishing tray.
Staple
The Staple feature is available on printing systems with an optional finishing device
installed. If a Booklet stitcher is installed, the Booklet printing feature is available. For
further details, refer to Booklet on page 4-1.
After installation, optional equipment must be selected in the printer driver in the
Device Settings tab. For further details, refer to Installing Optional Devices on
page 2-1.
Note: Staple and Separation features cannot be used simultaneously.
To Next Page
Loading...
