Printer Properties
User Guide 2-3
select this option from operation panel. See Auto Configuration on page 2-11 for
more information. 4
Punch Settings
When you select the check box for a finishing device shown in blue in the Device
options list, such as Finisher or Multi-Finisher, the Punch Unit Settings dialog box
appears. If the device listing is already enabled, double-click the option to display the
Punch Unit Settings dialog box.
Select 2 Hole, 2 & 3 Hole, or 2 & 4 Hole punch option depending on the optional
Punch Unit attached to your finisher to enable hole punching.
Assigning Virtual Mailboxes
If you enable the Hard disk check box, the Hard Disk Settings dialog box appears
and virtual mailboxes can be created. For further details, see Virtual Mailbox on
page 8-8.
Note: An installed hard disk supports the following options: Quick Copy, Proof and
Hold, Private Print, Job Storage, Virtual Mailbox, Temporary Storage, and
Permanent Storage.
To Next Page
Loading...
