Printer Properties
2-4 KX Driver
RAM Disk
The RAM disk functions as a hard disk saving print requests into the printing
system’s memory if a hard disk for printing is not installed. When a hard disk is
installed, the RAM disk function is inactive.
Note: Since the RAM disk is volatile memory, all data sent to the printing system is
lost if the power is turned off.
The size of the RAM disk is specified in settings at the printing system’s operation
panel. For further details, consult the printing system’s Operation Guide.
RAM Disk Settings
1
In the Device options list, enable the RAM disk check box. The memory capacity
can be adjusted in the RAM disk box. 1
2
Specify the RAM disk size. The maximum RAM disk capacity may vary depending
on your printing system model and installed memory. 2
For example, if the memory corresponds to 32 MB minus 24MB, the maximum
available capacity for the RAM Disk is 8 MB. The value in the RAM disk box will not
exceed 8 MB. For further details, consult the printing system's Operation Guide.
User Settings
The following user information can be configured by clicking User in the Device
Settings tab.
• Identification
• Unit of Measurement
• Language Preference Selection
To Next Page
Loading...
