Imaging
6-2 KX Driver
Custom Print Quality Settings
You can select one or more Custom Quality Settings:
• Resolution
• Kyocera Image Refinement
• EcoPrint
These settings can extend the life of toner cartridges by adjusting print resolution to
reduce the amount of toner used.
Note: The availability of EcoPrint on color printers depends on the printer model and
PDL (Page Description Language). To view or change PDL settings, in the Windows
Printers and Faxes folder, right-click the icon for your printing system and select
Properties. Click the Device Settings tab, then click PDL. For some color printer
models, Kyocera Image Refinement is only available for monochrome printing.
Fonts
The Fonts feature lets you specify how TrueType fonts are sent to the printing
system. The chosen method will affect the speed and quality of the print job.
Note: All of Kyocera's device fonts are TrueType fonts: do not disable them in the
driver.
Custom
Option Description
Resolution (monochrome
printers only)
The number of dots printed in one inch. At higher
resolutions more detail appears in the print job.
Select Fast 1200 mode, 600 dpi, or 300 dpi. Printer
models FS-1800, FS-1800+, and FS-3800 support
Fine 1200 mode.
Kyocera Image
Refinement (KIR)
Smooths the outlines of text and vector graphics.
For color printers, this option is only available when
printing in monochrome mode.
EcoPrint Reduces the amount of toner placed on the printed
page, and extends the life of the toner cartridge,
making EcoPrint both economical and ecological.
Because toner saturation is reduced, the text and
graphics appear lighter in the print job. EcoPrint
does not increase print speed. For some color
models, the EcoPrint options are: Off, 75%, or 50%.
To Next Page
Loading...
