Kyocera KM-C830D - Compatibility Settings

Printer Properties
2-10 KX Driver
2
In the Password dialog box, enter the new password in the Password field.
Reenter the password in the Confirm password field and click OK. 2
Note: Use a password from 4 to 16 characters.
Change the Password
1
In the Device Settings tab, click Administrator. 1
2
The Enter Password dialog box appears. Enter the password and click OK. 2
3
The Administrator Settings dialog box appears. Clear the Password protect
check box. A Password message appears. 3
4
Click OK. 4
See Set the Password on page 2-9 to enter a new password.
Compatibility Settings
This feature supports compatibility for media source values unique to the printer
driver, such as those for cassettes or feeders, so your newly installed Kyocera
Extended driver maintains identical media source support with the driver it replaces,
whether for a Kyocera driver or from another manufacturer. If media source macros
exist for the older driver, then the alignment of media source values will maintain
support without the need to change the macros.
Use the Driver Info utility, available on the Kyocera Software Library CD, to compare
the source values for all installed drivers.
If the values for a given media source differ between the old and new printer drivers,
reassign the value in the new driver to match the value in the previous driver.
Compatibility settings can be adjusted by clicking Compatibility in the Device
Settings tab.
Note: Changing the device settings may result in printing errors. For further details
on changing these settings, contact your nearest Kyocera dealer.
Device Compatibility
1
In the Device Settings tab, click Compatibility. 1