Job
User Guide 8-20
Job Storage
The Job storage feature saves jobs on the hard disk for future printing, even if the
printing system is switched off. You can also use access codes to restrict the printing
of forms.
1
In the Job tab, click Job storage (e-MPS) and then select Job Storage. 1
2
Select the Access code check box and enter the desired four-digit access code
using numbers between 0 and 9. When you want to print the saved jobs, enter the
access code on the print operation panel. 2
3
You can name the job for future reference when printing from the print operation
panel. 3
• If you select Application defined in the Job name field, the application
automatically names the document.
• To give it a name you create, in Job name, select Custom and enter the name
of your choice. The name can be up to 31 characters in length.
4
Click OK. When you select print, the job will be saved to the hard disk without
printing. 4
Print Jobs Saved Using Job Storage
To print forms and other documents saved using Job Storage, follow the same steps
as for Print Private Print Jobs on page 8-18.
The stored jobs will remain saved even after the printing system is switched off. To
delete them manually, follow the same steps as for Deleting Quick Copy Jobs on
page 8-17. When deleting jobs, you must enter the same access code as saved in
the Job storage procedure.
To Next Page
Loading...
