Kyocera KM-C830D - Color Reproduction

Imaging
User Guide 6-11
clicking ICM Settings. For more information see the section on ICM Color
Correction.
Color Reproduction
1
In the Color Correction dialog box, select Automatic, then click Color
Reproduction. (The Color Reproduction button is enabled only when Automatic
is selected.) 5
2
In the Color Reproduction dialog box, select one Mode, then click OK to save the
selection. 6
Color Correction
Option Description
Automatic Performs color matching according to the default
color profile specified in the Color Management tab
in Properties.
ICM (system corrected) Specifies color rendering in the print job to make it
as close to the original as possible. ICM technology
relies upon associating an output device like a
printing system with a Color Profile. An ICM Profile
for a printing system contains information about
rendering accurate color information for that device.
The settings for ICM must be set in the Color
Management tab in the printing system Properties.
In Windows 2000 and XP, additional ICM rendering
intent options are available under ICM Settings.
Note: ICM technology is not supported in Windows
95 or Windows NT.
None (application
corrected)
Processes the color data without applying the
adjustments contained in the printing system's
internal color look-up tables. Ink simulation will not
be executed. This is useful if the application
provides its own color correction.
Color Reproduction
Option Description
Auto 1 For use in almost all cases, for printing generic
documents.
Auto 2 Prints black text and graphs in black toner only.
Auto 3 Prints black text and graphs in four-color toner
(CMYK).
Auto 4 Prints images and graphs similar to colors shown on
the monitor.
Picture image Prints images, text, and graphs similar to colors
shown on the monitor.