Layout
4-3 KX Driver
3
Select Booklet. 3
4
Choose either Left edge binding or Right edge binding. 4
Complete the following steps to use the stapling feature:
5
Click the Basic tab, and under Destination, select a face down finishing tray. 5
If the Staple check box is not available in the Finishing tab, change the setting for
Destination in the Basic tab to an output tray that has a stapler.
6
Select the number of copies to print. 6
7
Click the Finishing tab, and select the Staple check box. Booklet (fold) is selected
automatically. 7
For models using an optional folding unit, select Folding tray as the output
Destination in the Basic tab. The Finishing tab will display Booklet (fold).
8
Click OK to return to the Print dialog box. 8
9
Click OK to start printing. 9
Multiple Pages Per Sheet
You can print multiple pages of the source document on a single sheet of paper.
Pages can be ordered in a variety of ways, and a border can be printed around each
document page.
1
From the application’s Print dialog box, open Properties. (Select Print from the File
menu, and select Properties.) 10
2
Click the Layout tab. 11
3
Select Multiple pages per sheet. 12
To Next Page
Loading...
