Printer Properties
2-12 KX Driver
TCP/IP port can be either an IP address or the printing system name (Host name).
Note: Auto Configuration is not supported for Microsoft Windows 95.
Click Auto Configure. An “in progress” message will appear.
The check box settings in the Device options list will be changed and the 3D image
will be updated according to the device options installed. Memory and RAM Disk
information will also change based on the setting information returned.
Under the following conditions the Auto Configure tool cannot communicate with the
printing system:
• The printing system is powered off or is in the middle of the startup process. In
such cases, Auto Configure will display the following message after the time out.
• The Windows XP firewall prevents the communication. It generates the following
message:
To Next Page
Loading...
