Printing Basics
3-11 KX Driver
The Print dialog boxes of some applications allow you to print just the odd or even
pages so that you can use manual duplex, as shown in the examples below.
The Microsoft Word Print dialog box has a Manual Duplex check box, as shown
above. When this option is selected, the odd pages are printed and then a message
(shown below) appears telling the user to flip the printed pages over and re-insert
them in the input bin of the printing system.
Some Kyocera printing systems have a manual duplex setting in Printing
Properties, in the Basic tab. Instructions for using this method for manual duplex
printing are below. If the Properties or Preferences dialog boxes for your printing
system don't have manual duplex settings, look for an option to print just odd or even
pages in the Print dialog box of the application you want to print from, as shown
above.
Manual Duplex Settings
• The printing system must be set to a local port.
- OR -
•The Source selection must be Cassette 1 or Cassette 2.
Adobe Framemaker
Microsoft Word
Adobe Acrobat
To Next Page
Loading...
