Kyocera PF-3100 User Manual

3S3
1-3-6
(3) Bulk paper feeder
is not recognized.
Defective wire. Follow the flow chart below.
Defective printer’s engine
PWB.
Problem
Causes/check procedures Corrective measures
End
OK?
No
Replace or repair
wire.
No
No
Yes
Yes
End
Wire between
printer base and bulk
paper feeder is in good
status?
Is the lamp (green
and orange) of a printer
base on?
Pin 10 of YC1
on the PF main PWB is
24 V, and pin 11 is 5 V?
Replace wire
between printer base
and PF main PWB.
Replace PWB of
printer base.
Replace or repair
wire.
Replace PF main PWB of the
bulk paper feeder.
After replacing, check whether
the operation status is in good
status or not.
Replace engine PWB of the
printer.
After replacing, check
whether the operation status
is in good status or not.
Yes
Yes
Is the lamp
(green) of a printer
base on?
Wire between
main body and printer
base is in good
status?
Start
Yes
No
No
OK?

Kyocera PF-3100 Specifications

General

Brand	Kyocera
Model	PF-3100
Category	Printer
Language	English