Default Setting (System Menu)
8-30 OPERATION GUIDE
Destination Check before Send
When performing sending jobs, display the confirmation screen of destinations after pressing the Start key.
The table below shows the available settings.
NOTE: Refer to Confirmation Screen of Destinations on page 3-29 for the Quick Setup steps.
Use the procedure below to set the destination check before send.
1 Press the System Menu key.
2 Press [Send] and then [Change] of Dest. Check before Send.
3 Select [Off] or [On].
4 Press [OK].
Color Type
Set the color type when you send color documents. The table below shows the available settings.
Selecting RGB displays the color profile values set on the machine.
Use the procedure below to set the color type.
1 Press the System Menu key.
2 Press [Send] and then [Change] of Color Type.
3 Select [RGB] or [sRGB].
4 Press [OK].
Item Description
Off Do not display the confirmation screen of destinations.
On Display the confirmation screen of destinations.
Item Description
RGB Send color documents in RGB.
sRGB Allows you to match the color space for machines that support sRGB.
To Next Page
Loading...
