3 PRINTING FROM Macintosh
106 Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.5.x
Booklet
In the Booklet menu, you can set booklet printing.
1) Booklet Paper Size
Select a paper size for the booklet. Both sides of a sheet are printed as two pages and then folded. The booklet size
will be the half size of the paper size that you specify.
2) Left to Right Page Layout
Select this check box to create a booklet that can be read from left to right.
3) Booklet Center Margin
Select the width of the margin added to the center.
4) Booklet Outer Margin
Select the width of the margin added to the short edge side of a sheet.
Cover Pages
In the Cover Pages menu, you can set Front Cover printing and Back Cover printing.
This option menu cannot be set when the Cover Page option for sending a print job with a banner page is enabled.
1) Use Front Cover
This sets front cover printing which allows you to insert or print a cover on a sheet fed from a different drawer or the
bypass tray.
To enable cover printing, select this check box and select the location from where a cover sheet is to be fed and the
print style to be used.
Source
Select from where the cover sheet is to be fed. When [Auto(Default)] is selected, the paper is automatically selected
according to the printed document size.
To Next Page
Loading...
