Kyocera TASKalfa 650c

4 PRINTING FROM UNIX/Linux
134 Printing from Application
¦ Image Quality Type
The Image Quality Type can be selected using the following options.
Example: The command to set the normal quality type for the print job is “lp -o iqnormal <filename>”
¦ Halftone
This sets the appropriate processing on halftone images. The halftone can be selected using the following options.
Example: The command to set the auto halftone for the print job is “lp -o halftone=AUTO <filename>”
¦ Black Over Print
This sets whether printing background content that has black text overlaid on it. If this is enabled, the gap between text
and background is minimized and color deviation is prevented. This mode can be selected using the following options.
Example: The command to set the black over print mode for the print job is “lp -o blackoverprint=1 <filename>”
¦ Color Balance
The Color Balance can be selected using the following options.
Example: The command to set “1” to the color balance for black toner for the print job is “lp -o CBK=1 <filename>”
Option Value Alternate Value Description
iqnormal Set the proper image quality for printing a general color
document.
iqphoto Set the proper image quality for printing photos.
iqpresen Set the proper image quality for printing a vivid
document.
iqlineart Set the proper image quality for printing a document
containing a lot of characters or line arts.
Option Value Alternate Value Description
halftone=AUTO Set the proper halftone depending on the contents in
the document automatically.
halftone=DETAIL Set the halftone in detail.
halftone=
SMOOTH
Set the halftone smoothly.
Option Value Alternate Value Description
blackoverprint=0 Disable the black over print mode.
blackoverprint=1 Enable the black over print mode.
Option Value Alternate Value Description
CBC=value Specify the color density of cyan toner. You can specify
the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
CBM=value Specify the color density of magenta toner. You can
specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
CBY=value Specify the color density of yellow toner. You can
specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
CBK=value Specify the color density of black toner. You can specify
the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4