5 MANAGING PRINT JOBS FROM THE CONTROL PANEL
160 Monitoring the Print Job Status
8
Press [PRINT]. If you have selected an encrypted PDF file for which a password has
been set, proceed to Step 9.
– The equipment starts printing. The printouts are directed to the receiving tray.
– The job in progress can be monitored from the [JOBS] tab listing the Normal Print jobs.
Before Disconnecting the USB Storage Device:
Make sure that “USB DEVICE in use Do not remove USB DEVICE” is not displayed on the touch panel. If it is, do
not disconnect the USB storage device; removing the device while the message is displayed could destroy the data
in the device or cause a malfunction of the equipment.
9
Press [PASSWORD].
To Next Page
Loading...
